PICMG

June 10, 2015

AdvancedTCA now supports IPv6 Addressing Protocols

PICMG

PICMG has just released Engineering Change Notices (ECNs) for the PICMG 3.0 AdvancedTCA Base Specification and the PICMG 3.7 AdvancedTCA Base Extensions Specification.

AdvancedTCA was originally specified to use 32 bit IP addresses according to the IPv4 protocol. IPv4 supports 4 billion distinct IP addresses and in the emerging world of Internet of Everything and billions of interconnected devices, this is not enough. IPv6 uses 128 bit addresses, so more than 3.4 times ten-to-the-thirty-eighth power devices can be directly addressed.

Engineering Change Notices are a method PICMG uses to make permanent, binding changes to a specification without releasing a new revision. Once released, they become part of an existing specification. The IPv6 feature is completely optional and does not affect backwards compatibility in any way. All existing compliant ATCA systems will remain so. New systems can choose to implement this feature or not.

ECN001 for PICMG 3.0 Revision 3.0 may be downloaded here.

ECN001 for PICMG 3.7 Revision 1.0 may be downloaded here.

June 3, 2015

EECatalog Q&A with Joe Pavlat: No Resting On Laurels For ATCA

PICMG

Chris Ciufo, Editor-in-Chief for embedded content at Extension Media recently interviewed PICMG President Joe Pavlat about the state of ATCA, 100G signaling, software trends and the fundamentally different needs of the Communication Service Providers that serve the telecom market and the Enterprise Service Providers that deliver services to companies like Amazon, Facebook, and Yahoo. Joe explained that the ATCA ecosystem is healthy and that the CSP’s believe that, in the future, only about 10% of their equipment needs can be met with commodity “pizza box” hardware. At the same time, the entire ecosystem of equipment builders is facing downward pressure on pricing as everyone is trying to provide more services to more customers at today’s costs.

Click here for the full interview.

April 29, 2015

New Revision of CompactPCI Serial

PICMG

A few years ago, PICMG released a new version of CompactPCI known as CompactPCI Serial. It provides a ten-fold or so increase in performance, more interconnectivity using fewer pins, and cost effective features including multi-channel Ethernet without the need for a switch. It is already popular in Europe, where it was developed, and its popularity is now moving around the globe.

A new revision of the standardis now in final adoption ballot, Revision 2.  It adds incremental features and capabilities, which is typical of revisions to well established standards. It now supports placement of the system slot on either the left or right side of the backplane. More importantly, Revision 2 supports additional rear I/O on the P6 connector and increased capability on Rear Transition Modules (RTMs). Graphics, USB, SATA, and other System Slot connections can now be routed out the rear, which is important for conduction cooling applications where the front module is fully encased. PCI Express can also be routed out the rear, making it possible to easily interconnect multiple homogenous or heterogeneous PCI Express systems.

It should be available for general distribution in May.